FIRM-FILL® SCM-125 (Sound Control Mat)

FIRM-FILL® SCM-125, a 1/8" (3mm) sound control mat, is engineered to limit impact sound transmission in multi-family construction. Ideal for when the gypsum concrete pour is not a standard thickness, FIRM-FILL® SCM-125 is topped with a minimum of 3/4" (19mm) of a FIRM-FILL® Brand Gypsum Concrete to create an effective low profile sound control system.

 

Recommended For

 

Covered by

 

Features & Benefits

  • Cost-effective way to address IIC requirements
  • Smoother floor transitions between hard surface and carpet areas
  • Expert application; installed exclusively by Licensed Applicators

 

External Resources

Sweets ProductTAG
CAD Details

 

FIRM-FILL SCM-125 (Sound Control Mat)

Product Resources

Key: Word PDF Web Page
Acoustical Design Guidelines
Product Submittal
Project References
BIM
CAD
Drying Conditions Flyer
Post-Pour Instructions
Guidelines for Finished Floor Coverings
Thickness Guidelines
Warranty

Featured Application

Margaritaville Vacation Club, U.S. Virgin Islands
The Promenade at Founders Square in Portage, IN

 

Technical Data
Properties
 
Roll Weight 33 lbs.  
Thickness 1/8" (3mm)  
Width 60"  
Length 80'  
Square Feet/Roll 400 square feet/roll  

 

Compression Resistance

Force Applied
Residual Thickness
Actual Residual Thickness (in)
42 lbs./sf 100% 0.191
105 lbs./sf 98.96% 0.189
505 lbs./sf 97.11% 0.182

 

FIRM-FILL® SCM-125 is a component in an overall floor/ceiling assembly. Its performance is affected by every other component and the likelihood of achieving code compliance is contingent upon many other trades including (but not limited to) framers, plumbers and drywall contractors. Developers and general contractors are responsible for building properly and testing field performance as soon as possible in order to assure the reliability of the project.

WARNING: Laboratory tests are not a guarantee of field performance because of the issues noted above and many other design errors that may occur. Please consult a professional acoustical consultant to assure plans are proper and that the floor/ceiling assembly can perform to expectations.